Home > MO Pro Round Liner Cartridge Matrix

MO Pro Round Liner Cartridge Matrix

MO Pro Round Liner Cartridge Matrix

Matching needle geometry to the work in front of you is what separates a smooth session from a rework, and this matrix walks through MO Pro round liner diameters, sizes, machine fit and procedure-based selection. When you restock wholesale tattoo ink cartridges, the goal is to buy the exact configurations your artists reach for, and the same planning logic applies across studio consumables and wholesale tattoo supplies ordered for the whole shop.

20pcs/box RL MO Pro Tattoo Cartridges for Fineline Tattooing & Permanent Makeup Eyeline

Selection Path

Four Filters Decide Most Cartridge Orders

Machine system, procedure, needle type and pack size drive the buying decision. Start with the filter that matches the question you are answering today, then confirm the exact variant on the product page.

Terminology Decoder

Cartridge Anatomy & Needle Terms

"Tattoo ink cartridges" is the buyer's shorthand for cartridge needles that also carry ink to the tip. Getting the vocabulary straight prevents ordering the wrong needle card for the job.

Round Liner (RL)

Needles grouped in a tight circle so the tips form a fine point. Used for crisp outlines, fine lines and detail work.

Round Shader (RS)

A looser grouping that spreads the needle tips for shading and soft fill. It is a separate needle type from the RL configurations in this listing.

Magnum (M)

A flat, wide grouping for colour packing and broad, even shading. Sold as its own needle type rather than as a round liner variant.

Membrane

A barrier fitted inside some cartridges that helps block ink backflow into the grip. Whether a given model uses one varies by product, so confirm the specification if it matters to your setup.

Drive Bar

The internal stem that links the needle group to the machine's reciprocating mechanism and sets the working stroke of the needle.

Tube & Tip

The plastic housing that holds the needle group and channels ink down to the tip. Its colour and shape help identify the configuration at a glance.

Ink Flow

How evenly ink travels from the tube to the skin. The MO Pro product page describes cartridges crafted to deliver optimal ink flow and consistent needle penetration.

Sterilization

Hygiene treatment applied before packaging. The MO Pro page states each cartridge is individually packaged and sterilized.

This listing covers Round Liner (RL) configurations only. Details such as tube length, membrane type, body material and country of origin are not published on the product page, so confirm them with the supplier before committing to a large order.

Machine Side

Machine Compatibility Matrix

The MO Pro product page states compatibility with all major cartridge systems. Compatibility still depends on your grip and setup, so verify these points before ordering in volume.

Machine type What to verify before ordering Why it matters
Wireless pen machines Confirm the grip accepts a standard cartridge system and check the grip diameter against the cartridge body you plan to use. A cartridge that does not seat fully can wobble and change line quality during a session.
Rotary machines Check the stroke setting range and whether the machine uses a cartridge grip rather than a traditional tube and bar setup. Stroke length changes how the needle group behaves at the skin, so the same cartridge can feel different across machines.
Coil machines Confirm the frame is equipped with a cartridge-compatible grip or adapter before buying boxes in bulk. Coil setups vary widely; a cartridge-only order is only useful if the machine side is already converted.
Shared studio grips Standardise on one cartridge system across the shop so artists can swap grips without matching brands manually. Mixed systems are the most common cause of "wrong cartridge" complaints in multi-artist studios.
Compatible with all major cartridge systems (as stated on the product page) Round Liner (RL) needle type Product No. TNC-016 RL 20 pcs/box

Application First

Procedure-to-Cartridge Selector

Work backwards from the service on the books. These pairings are conventional starting points for round liner work; confirm the final diameter and size against the options on the product page and your own machine setup.

Fineline & micro-detail

Reach for the smallest diameters — #06 0.20mm or #08 0.25mm — with the shortest configurations such as 1RL and 3RL.

Buyer decision: keep one box of the finest diameter in stock for detail bookings and check it monthly for tip condition.

Outlining & standard lining

Mid-range sizes such as 5RL, 7RL and 9RL on #08 or #10 0.30mm diameters cover most everyday outline work.

Buyer decision: this is usually your highest-consumption configuration, so it drives pack-size planning.

Bold linework

Larger configurations such as 11RL, 14RL and 18RL with #10 or #12 0.35mm diameters suit heavier, more graphic line weights.

Buyer decision: lower volume, higher diameter — order smaller quantities so boxes do not sit unopened.

Permanent makeup brows

Hair-stroke style brows favour the finest diameters with 1RL and 3RL for controlled, narrow deposits.

Buyer decision: PMU artists often want a dedicated box per diameter to keep cross-service contamination out of the workflow.

Lip liner & eyeliner definition

Defined lip edges and lash-line definition rely on the smallest RL configurations on #06 or #08 diameters.

Buyer decision: pair these with a consistent diameter choice across the team so results stay repeatable between artists.

Shading & colour packing

Round liners are not the tool for broad shading or packing. Those jobs call for round shader or magnum configurations instead.

Buyer decision: separate shading stock from lining stock so an RL order never becomes a substitute for a missing shader.

Product Specifics

MO Pro Round Liner Spec & Variant Selector

Everything below comes directly from the current product listing. Diameter and size must both be chosen before the cartridge can be added to the cart.

20pcs/box RL MO Pro Tattoo Needle Cartridges Round Liner
Product name 20pcs/box Round Liner MO Pro Tattoo Needle Cartridges Permanent Makeup MO Tattoo Cartridges RL
Product No. TNC-016 RL
Category Needles & Cartridges → MO Pro Tattoo Cartridges
Needle type Round Liner (RL)
Diameter options #12 0.35mm / #10 0.30mm / #08 0.25mm / #06 0.20mm
Size options 1RL, 3RL, 5RL, 7RL, 9RL, 11RL, 14RL, 18RL
Pack quantity 20 pcs/box
Sterilization Individually packaged and sterilized
Compatibility Compatible with all major cartridge systems
Rating 4.9 (8 reviews)

Incoming Inspection

Bulk Quality & Sterility Checklist

A five-minute check on the first box of every delivery protects the whole order. Run these checks before the stock goes into the drawer.

20pcs/box RL MO Pro Tattoo Needle Cartridges Round Liner
1

Sealed individual packaging

The product page states each cartridge is individually packaged — check every unit in the box is still sealed on arrival.

2

Sterilization statement in writing

The listing states cartridges are sterilized. Keep the statement documented against the delivery record for your studio's hygiene file.

3

Lot and batch consistency

Order one configuration per purchase where possible, and compare codes across boxes so a single order is not split across batches.

4

Needle tip condition

Inspect the tip grouping for bent or hooked needles. A damaged tip shows up as a scratchy line long before it becomes obvious.

5

Body and drive connection

Check for cracks in the housing and confirm the cartridge seats fully and squarely into the grip with no play.

6

Compatibility spot-check

Test a single cartridge on each machine and grip in the studio before opening a full case for the team.

7

Review signal, not a guarantee

The listing carries a 4.9 rating from 8 reviews. Treat that as a starting signal and rely on your own inspection for bulk stock.

8

Return and replacement terms

Confirm the return, replacement and stock-issue process with the supplier before you commit to a large or repeat order.

Studio & Shop Ordering

Ordering Path for Studios, Shops and Resellers

A repeatable order sequence keeps shelves stocked without tying up cash in the wrong diameters.

Step 01

Lock the configurations

Write down the diameter and size pairs your artists actually use in a normal week, then map them to the eight RL sizes available.

Step 02

Set stock levels per configuration

High-turn configurations such as 3RL and 5RL warrant deeper cover than 14RL or 18RL, which move far more slowly.

Step 03

Place and verify

Add the chosen boxes to the cart, confirm the displayed price per variant, then run the incoming checklist before shelving the delivery.

Ready to Stock the Configurations Your Artists Use?

Select the diameter and size, confirm the displayed box price, and contact the team for larger or repeat orders across your studio.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

Improving Tattoo Precision with Professional Round Liner Tattoo Cartridges

Professional round liner tattoo cartridges enhance fine-line precision, reduce skin trauma, improve ergonomic comfort, and offer broad machine compatibility for efficient, high-qua

Read article

Key Features of Tattoo Ink Cartridges for Permanent Makeup Applications

The article explains how individually sterilized tattoo ink cartridges with consistent flow and versatile configurations enhance precision, hygiene, and adaptability in permanent m

Read article

Choosing Tattoo Machine Cartridges that Balance Performance and Comfort

Ergonomically designed tattoo cartridges reduce hand fatigue and deliver consistent ink flow across needle types, helping artists maintain precise, reliable work throughout long se

Read article

Frequently Asked Questions

what does “rl” mean in this product name?

rl stands for round liner, the needle type of this cartridge. the listing is identified as product no. tnc-016 rl and sits under the needles & cartridges → mo pro tattoo cartridges category.

which needle diameters are available?

the page lists four diameter options: #12 0.35mm, #10 0.30mm, #08 0.25mm and #06 0.20mm. choose the diameter as the first step of the variant selection.

which sizes can i order?

eight round liner sizes are listed: 1rl, 3rl, 5rl, 7rl, 9rl, 11rl, 14rl and 18rl. smaller configurations suit fine detail work while larger ones cover bolder line weights.

are the cartridges individually packaged and sterilized?

yes. the product description states that each cartridge is individually packaged and sterilized, which is the basis for the incoming inspection checklist on this page.

which machines are the cartridges compatible with?

the listing states the cartridges are compatible with all major cartridge systems. even so, confirm the grip fit and stroke setup on your own machine before ordering in volume.

how is the product sold and what does it cost?

cartridges are sold at 20 pcs per box with a − / + quantity selector. the displayed price is $13.90 once a diameter and size are chosen; the listing shows $0.00 until a variant is selected.